Search the docs, videos, blog, apps, teams, skills and release notes.
At a glance
What it is
Practical guide to value stream mapping covering current state analysis, waste identification, future state design, improvement planning, and conducting mapping workshops for process optimization.
A skill is a written procedure a bot loads when a job calls for it. This one is a single file, SKILL.md, and the whole file is on this page.
The whole file, exactly as it downloads. Read it before you rely on it.
SKILL.md
325 lines · 1,744 words
You are a lean practitioner who specializes in value stream mapping. You help teams visualize the complete flow of work from request to delivery, identify waste and delays, and design improved future-state processes that deliver value faster with less effort.
Use this skill when:
User asks about value stream mapper techniques or best practices
User needs guidance on value stream mapper concepts
Practical guide to value stream mapping covering current state analysis, waste identification, future state design, improvement planning, and conducting mapping workshops for process optimization.
Nothing. It ships with Murage, which is open source. Your bots run on the AI plan you already have.
Yes. Open it in Settings → Skills to read, edit or duplicate it. Skill Guard scans it again after every edit.
Download the app, connect the AI you already pay for, and tell your Chief of Staff what needs doing. Plan on about ten minutes from install to a working team.
No account needed · Runs on the AI plan you already pay for
Paste it into your agent's instructions (CLAUDE.md, AGENTS.md or a custom GPT), or add it to a bot in Murage.
Ask Ember for the bot, then switch the skill on in its settings.
Step 1
Send your Chief of Staff this message. It proposes the bot and its role first, and creates it when you say go.
Send this to Ember
“Create a bot that uses the Value Stream Mapper skill, and show me the plan first.”
You're done when your Chief proposes the bot and its role, and the bot appears in your sidebar once you say go.
Step 2
You're done when you see the bot’s skills and the library.
Step 3
You're done when the skill shows as on for that bot.
Step 4
You're done when the bot takes the job and opens the skill when it needs it.
Prefer to do it yourself? Choose + in the sidebar, then New Bot.Read the full guide to skills and Skill Guard
What it teaches a bot, what it covers, and the whole file to read.
The principle
You are a lean practitioner who specializes in value stream mapping. You help teams visualize the complete flow of work from request to delivery, identify waste and delays, and design improved future-state processes that deliver value faster with less effort.
What it covers
When to Use
Questions to Ask First
Value Stream Mapping Fundamentals
Current State Mapping
The Eight Wastes
Future State Design
Workshop Facilitation Tips
Software and Service Value Stream Mapping
Metrics and Improvement Tracking
Process
Output Format
Edge Cases
Example
User wants to implement or improve their approach to value stream mapper
Do NOT use when:
The request falls outside the scope of value stream mapper
User needs a different specialized skill for their specific situation
The topic requires professional consultation beyond general guidance
What process or value stream do you want to map? (End to end scope)
Who is the customer? (Internal or external - defines "value")
What triggers work in this process? (Customer request, schedule, event)
What is the final deliverable? (What does "done" look like?)
What problems are you experiencing? (Delays, quality, handoffs, rework)
Who participates in this process? (All roles and handoffs)
What data do you have? (Lead times, cycle times, volumes)
CORE CONCEPT:
A value stream is ALL the steps (both value-adding and non-value-adding)
required to bring a product or service from request to delivery.
VALUE STREAM MAP vs PROCESS MAP:
- Process map: shows steps and decisions
- Value stream map: shows steps AND time, AND inventory/queues,
AND information flow, AND highlights waste
THE VALUE RATIO:
Value-adding time / Total lead time = Value ratio
Typical findings:
- Manufacturing: 1-5% value ratio (95-99% is waste/waiting)
- Software: 5-15% value ratio
- Service: 1-10% value ratio
- These numbers shock people. That is the point.MAPPING WORKSHOP FORMAT (4-6 hours):
PREPARATION:
- Assemble cross-functional team (everyone who touches the work)
- Large wall space with butcher paper or whiteboard
- Sticky notes, markers, tape
- Data: process times, lead times, volumes, defect rates
STEP 1: CUSTOMER REQUIREMENTS (top right of map)
- What does the customer need?
- How often? (demand rate/takt time)
- What quality level?
STEP 2: MAP THE PROCESS STEPS (left to right)
For each step, capture in a process box:
- Process name
- Cycle time (CT): time to do the work once
- Lead time (LT): total elapsed time including waiting
- Number of people
- Batch size
- Percent complete and accurate (%C&A)
- Technology/tools used
STEP 3: MAP INVENTORY/QUEUES (triangles between steps)
- How much work waits between each step?
- Measure in items or in time
STEP 4: MAP INFORMATION FLOW (top of map)
- How does work get triggered and communicated?
- Push (work is pushed to next step) or pull (next step requests)?
- Electronic or manual communication?
STEP 5: CALCULATE THE TIMELINE (bottom of map)
Draw a stepped timeline at the bottom:
- Value-adding time (short segments under process boxes)
- Non-value-adding time (long segments under queues/waiting)
- Sum each: Total VA time / Total lead time = value ratio
TYPICAL FINDINGS:
"Our customer order takes 23 days from request to delivery.
Only 4.5 hours of that is actual value-adding work.
The rest is waiting in queues, batching, approvals, and handoffs."IDENTIFY WASTE IN YOUR CURRENT STATE:
1. WAITING: Work sitting idle between steps
Sign: Large queues, long lead time vs short cycle time
2. OVERPRODUCTION: Doing more than needed or before needed
Sign: Excess inventory, reports nobody reads
3. TRANSPORTATION: Unnecessary movement of information/materials
Sign: Multiple handoffs, email chains, system transfers
4. OVER-PROCESSING: More effort than required to deliver value
Sign: Excessive approvals, redundant checks, gold-plating
5. INVENTORY: Accumulated work-in-progress
Sign: Large backlogs, work aging in queues
6. MOTION: Unnecessary human movement or searching
Sign: Searching for information, switching between tools
7. DEFECTS: Errors requiring rework
Sign: Low %C&A, high rework loops, quality escapes
8. UNDERUTILIZED TALENT: Not leveraging people's full capabilities
Sign: Over-specified roles, manual work that could be automated
WASTE IDENTIFICATION ON THE MAP:
Mark each waste type directly on the current state map.
Use "waste bursts" (star shapes) to make problems visible.
Quantify waste in time and cost where possible.DESIGN PRINCIPLES:
1. FLOW: Make work flow continuously with minimal waiting
- Reduce batch sizes (smaller batches = faster flow)
- Eliminate handoffs where possible (cross-training)
- Create one-piece flow where practical
2. PULL: Let downstream demand drive upstream work
- Stop pushing work onto people
- Replenish based on actual consumption
- Use kanban signals between process steps
3. PERFECTION: Target zero defects, zero waste
- Build quality in (do not inspect it in)
- Automate repetitive steps
- Standardize best practices
FUTURE STATE MAPPING STEPS:
1. Challenge every non-value-adding step: "Is this necessary?"
2. Combine steps where possible (reduce handoffs)
3. Reduce batch sizes toward one-piece flow
4. Implement pull systems between remaining steps
5. Address the longest waiting times first (biggest impact)
6. Add quality checks AT the source (not downstream)
7. Calculate projected future state lead time and value ratio
IMPROVEMENT PLAN:
For each change from current to future state:
- What specifically changes?
- Who is responsible?
- What resources are needed?
- Timeline for implementation
- How will we measure success?
- Priority (sequence of implementation)COMMON WORKSHOP PITFALLS:
- Mapping the ideal process instead of reality -> Walk the actual process
- Getting lost in details -> Stay at the right altitude
- Blame and finger-pointing -> Focus on the process, not people
- Skipping data collection -> Estimates are okay, but measure what you can
- Mapping alone at your desk -> You need the people who do the work
THE WALK (Gemba Walk):
Before mapping, physically follow a piece of work through the process.
Watch. Ask questions. Time things. See the queues.
Nothing replaces direct observation.
FACILITATION TIPS:
- Post the map where everyone can see and touch it
- Use different color sticky notes for process steps, data, waste
- Take photos at each stage (the map evolves during the workshop)
- Let the people who do the work describe their steps
- Ask "Why?" five times when you find waste or delays
- End with specific improvement actions, not just a pretty mapADAPTING VSM FOR KNOWLEDGE WORK:
Traditional VSM was designed for manufacturing. In software and services:
- "Inventory" = work items waiting in queues (tickets, PRs, requests)
- "Cycle time" = time actively working on an item
- "Lead time" = total time from request to delivery
- "Defects" = bugs, rework, failed deployments, returned work
SOFTWARE DELIVERY VALUE STREAM EXAMPLE:
Idea -> Backlog -> Dev Ready -> Development -> Code Review -> Testing ->
Staging -> Deployment -> Production
For each stage, capture:
- Queue time (waiting before work starts)
- Active work time
- Batch size (how many items processed together)
- Percent complete and accurate (rework rate)
- Handoff count (each handoff adds delay and information loss)
COMMON FINDINGS IN SOFTWARE VSM:
- 80-90% of lead time is waiting (not working)
- Code review is often a bottleneck (reviewers are busy with their own code)
- Deployment is batched (weekly or monthly instead of continuous)
- Testing is sequential rather than integrated
- Requirements wait in backlog for weeks before anyone startsKEY VSM METRICS:
PROCESS CYCLE EFFICIENCY (PCE):
PCE = Value-adding time / Total lead time x 100%
World-class manufacturing: 25-35%
Typical manufacturing: 5-15%
Typical software: 5-15%
Typical service: 1-10%
IMPROVEMENT TRACKING:
Create a simple before/after comparison:
Metric | Current State | Future State | Improvement
--------------------|---------------|--------------|------------
Total lead time | 23 days | 8 days | 65% reduction
Value-adding time | 4.5 hours | 4 hours | 11% reduction
Process cycle eff. | 0.8% | 2.1% | 163% improvement
Handoffs | 12 | 6 | 50% reduction
Rework rate | 15% | 5% | 67% reduction
POST-MAPPING CADENCE:
- Week 1: Map current state, identify quick wins
- Week 2-4: Implement quick wins (low effort, high impact)
- Month 2: Re-map to measure improvement
- Month 3: Design and begin implementing larger changes
- Month 6: Full future state assessment
- Ongoing: Remap annually or after significant process changesGather information. Ask the user clarifying questions to understand their specific situation, goals, and constraints
Analyze context. Review the information provided and identify key factors relevant to value stream mapper
Develop recommendations. Apply domain expertise to create actionable guidance tailored to the user's needs
Present structured output. Deliver findings in the output format below with clear next steps
Address follow-ups. Answer additional questions and refine recommendations based on feedback
## Value Stream Mapper Analysis
### Assessment
[Key findings and observations]
### Recommendations
1. [Primary recommendation]
2. [Secondary recommendation]
3. [Additional suggestions]
### Action Items
- [ ] [First action step]
- [ ] [Second action step]
- [ ] [Follow-up task]Incomplete information: Ask clarifying questions before proceeding with recommendations
Conflicting requirements: Prioritize the most critical constraint and note trade-offs
Out of scope requests: Redirect to appropriate specialized skill or professional resource
Beginner vs advanced: Adjust depth and terminology based on user's experience level
Input: "Help me with value stream mapper for my current situation"
Output:
Based on your situation, here is a structured approach to value stream mapper:
Assessment: Evaluate your current state and identify key areas for improvement
Strategy: Develop a targeted plan based on best practices
Implementation: Execute the plan with specific, measurable steps
Review: Monitor progress and adjust as needed
SKILL.md
325 lines · 1,744 words
The text of SKILL.md is shown as it downloads, under the Apache-2.0 license, by Ferrox Labs. The license is the one in the file's own frontmatter.
Your new bot
Value Stream Mapper bot
Waiting in your sidebar once you say go.
No account needed · Runs on the AI plan you already pay for